The UWOO Y1 kit includes the device, a manual, a Quality Control card, a warranty card, the USB cable, the cleaning brush, and the cleaning spoon. Most HnB devices come fully charged or close to fully charged, but our UWOO Y1 arrived with less than 25% charge remaining. To charge the device, just connect the USB cable to the USB port and a power source. The LED indicator lights will flash while charging. The lights show the level of charge with 4 lights meaning that there is 75%+ charge remaining, 3 lights means 75%-50% remaining, 2 lights means 50%-25% remaining, and only 1 light lit means that there is 25% or less charge remaining. Charging will take 3 hours.

Once your device is charged, it has ready to use! The first thing you will want to do is set the desired temperature. To do so, press the control button 4 times in rapid succession. There are 4 temperature settings, as indicated by the LED lights. Our test users recommend staying on the highest setting, which correlates to the top LED light, since the highest temperature the device reaches (by our testing) is 180C.

Now, load your HeatStick then press and hold the control button until the device vibrates and the LED indicator lights will begin turning on, one-by-one, as the device heats. The heating process takes approximately 16 seconds. When the device is at the proper temperature, all the lights will be lit and the device will vibrate again. One cycle with UWOO Y1 will last approximately 5 minutes or 12 puffs. Since this is a multi-use device, you can use it right after finishing a cycle, however the manufacturer does recommend waiting 5 minutes between uses. If ever you need to stop a cycle, just press and hold the control button until the device vibrates and the LED indicator lights turn off.

UWOO recommends that you clean your device after every 10-15 cycles. This isnot unreasonable since the device is equipped with a self-cleaning feature. It is such a simple process, just press the control button 7 times in rapid succession. If done correctly, the device will vibrate and the LED indicator lights will flash until the cleaning process is complete, at which point, they will turn off. In total, the self-cleaning process takes about 1 minutes, 26 seconds.


HeatSticks: HEETS, Marlboro for IQOS
Number of Cycles: Officially 40
Charging Time: 3 hours
Battery: 3200mAh
Maximum Blade Temperature: 180 C/ 356 F
How Long Does a Cycle Last: 5 minutes
Time it Takes for Device to Heat: 16 seconds
Life Expectancy: 1-1.5 years
Maintenance: Great
Colors: Black, white, blue, red, golden, and pink

HOW TO USE:

How To Turn ON/Off ?
Press and hold control button until device vibrates and LED indicator lights start flashing
Temperature Adjustment?
Yes - click the control button 4, times in rapid succession, then click again to choose your temperature preference
Heating Time?
16 seconds.
Indication that the Heating Process has Started?
Vibration and LED lights will begin turning on, one by one
Indication that Device is Ready to Use: Vibration
Length of Cycle: 5 minutes
Indication that Device is Powering Off ?
1.Vibration 30 seconds before shutoff, 2.then two vibrations to indicate shut off.
How to Shut Off Device? Press and hold control button until device vibrates and LED lights turn off
Number of Cycles (aka number of HeatSticks before needing to recharge device)? Officially 40, but can got 44
How to Check Battery Status? Click control button once
Indicate when Device Needs Cleaning? No
How Often Should You Clean the Device? We recommend self cleaning every day,and manual cleaning at least once per week
Self-Cleaning Function? Yes - click the control button 7times in rapid succession










Save Money Instructions:

1.Get discount coupon codes before completing the order.
2.Redeem your reward points during checkout.
3.Become one of our wholesale customers to get VIP price, join our wholesale program now.
Your satisfaction is our top priority. Feel free to contact us at any time any place.