Hellvape Dead Rabbit 3 RTA (6th Anniv EDN) Review by Aleksandr

41
Hellvape Dead Rabbit 3 RTA (6th Anniv EDN) Review by Aleksandr-Cover

The Hellvape Dead Rabbit 3 review is the third generation of non-proper tanks with an abundance of blowing around the coils. In this case, the holes shifted from the dome to the base and there was a direct certified gilding.

The first time I see such a story with a color scheme and a straight accent on this. Although somewhere at the dawn of my waping, he read the legend of gold coils with a resistance of 0.01 for fur mods, the source was not tested and the story itself has already overgrown with a beard more than mine. But as a jubilee version, the manufacturer may actually not stint on the materials of the dome coating, so that he shines as much as possible.

We also look at the characteristics of Hellvape Dead Rabbit 3 – the tank is quite large, there are options for choosing glass and, accordingly, soaring format.

And we start unpacking. Traditionally, the craft knife OLFA CK-2 participated in the unpacking.

First of all, we are met by this mentioned certificate. From the useful, it must probably increase the sense of its own importance in soaring.

The set is plentiful and even in some places is redundant. For example, I did not immediately understand why, with straight slots in screws at the base, there is still a key to the hexagon.

Then I looked closely at the configuration – I understood. You can change the screws of coil clamps if it is very important for someone.

Let’s get back to the dome and base. First of all, I change the glass to the woman and note the excellent fit of the details, otherwise sometimes you can’t pull the pre -installed glass “dry”. Along the way, O-Ring is returned to the place.

We remove the topkeep into a banded and do not forget to rinse before the first use. I note 2 large holes for the bay – any container is essentially suitable and there will be compensation for excess pressure during refueling.

You can study the instructions, but the maintenance is quite simple.

Although as a simple one … Put the coils too high – you will not have time to supply liquid, put too low – the base will be melted and especially that insert between the halves. You will put a little cotton – it will quickly burn out due to insufficient supply of fluid, put a lot of cotton wool – the feed hole will be scorched in a swollen form and also not OK. Karoch, just yes not easy, maybe you have to experiment a couple of times.

I managed to decently collect the first time, but this is the experience and the covers of devices in my arms.

Something divorced me of these dead rabbits, like dogs not cut (c)

But in general and with a black boxmod with its gold elements (in my case, Dovpo Themis 220W) looks perfectly. You can also choose a translucent liquid and then in the sun will shine straight to the most, all gypsies in the area will be called. Just kidding, this is a classically stylish combination.

Here is such a review, I am already chasing a week – positive impressions. Unless it is a little large and it will be necessary to choose a boxmod for 2*21700 under it and I see the point of bothering, because the tank came in and most likely for me for a long time. The taste here may not be top -end in comparison with the same drip higher, but this is a tank and another league. It seems to me quite decent for the format of impotion. Maybe there will be a mood and experiment with pornocyls, installation 2 and/or one diagonal. It seems to me that this is quite possible.

The price of Hellvape Dead Rabbit 3 in 30 bucks before the use of coupons seems high to me, and at the same time +-reasonably high-

Aleksandr has written an Russian review on obzorpokupok.info, which is an Russian website, click to view original review.

LEAVE A REPLY

Please enter your comment!
Please enter your name here